Aluminum alloy doors and Windows maintenance method Aluminum alloy doors and Windows maintenance tips

First of all, to ensure the cleaning of aluminum alloy doors and Windows.

In the process of using aluminum alloy doors and Windows, the movement wants light as possible, don't be too hard. Open the Windows and doors, if found, should be first. Always keep the door frame clean, especially the push-pull tank clean. Here gathered dust is easy to cause the aluminum alloy doors and Windows of the push-pull difficulty, cause the damage of the doors and Windows, which affects the service life of the doors and Windows.

Second, pay attention to the cleaning method.

Scrubbing in aluminum alloy doors and Windows, try to choose soft gauze or cotton silk and so on, so as to avoid surface scratch doors and Windows. In aluminum alloy doors and Windows when removing the best off the window, can wipe clean, and can guarantee security.

Third, accessories and maintenance methods

Always check the sliding door window all kinds of hardware parts, if found to have damage phenomenon, should be timely to repair or replacement. Chute with for a long time, you can apply a little wax or some drops of oil fire, in order to reduce friction, keep the Windows open shut down easy and flexible. Aluminum alloy doors and Windows sealed tops and seal is sealed insulating glass of two key components, such as aging contraction or loose, should be in time for the replacement.

Fourth, the anticorrosion methods

Try to avoid acidic, alkaline chemicals in contact with the surface of the aluminum alloy doors and Windows, when there are stains and stolen goods, can use soft cloth glue water or neutral detergent for cleaning, in order to prevent the door from corrosion.

Seven aluminum alloy doors and Windows to maintain small coup

1. Aluminum alloy doors and Windows in use, the movement wants light, push-pull let nature take its course; Don't pull hard push found to have difficulties, should first troubleshooting. Soot formation, deformation is a major cause of aluminum alloy doors and Windows new pull hard, to keep the door frame clean, especially the push-pull tank clean. Available vacuum suction slot and the ordinary wool top of dust.

2. Clean the window of aluminium alloy door, people don't trample on the aluminum frame, don't pull box as support.

3. Aluminum alloy doors and Windows can use soft cloth dipped in water or neutral detergent, do not use plain soap and detergent, more can't use such as household cleanser, essence of wash lavatory strong acid and alkali cleaner.

4. After the rain, should be wiped dry wet glass and door window frame, pay special attention to dry chute with water. Chute with long, friction force increases, can add a little oil or wax coating a layer of fire.

5. Should check the connection of the aluminum alloy frame, timely and tighten bolts, replace the damaged parts. Positioning pin, the wind brace, floor spring, such as aluminum alloy doors and Windows of damageable parts, check often, add lubricating oil regularly to keep clean and flexible.

6. Wool top sealing and glass glue sealing is the key to ensure the doors and Windows sealed heat preservation structure, such as have off to repair in time, change.

7. Check aluminum alloy box wall junction, long if there are any loose easily deform the overall framework, to close the doors and Windows can't, seal. So the link should be immediately fastening screw loosening, such as screw loose footing, the application of epoxy super glue a small amount of cement cementing.